After cleaning, turn the device on for 30 minutes without the drying insert. Smoke and odours may be produced
when the device is used for the first time. It is normal during the first use. Provide sufficient ventilation. After 30
minutes, rinse the trays with water and dry all parts.
Before cleaning, disconnect the device from the mains and leave to cool down. Dry all parts after cleaning and
before storage.
Do not clean the device with aggressive chemicals or abrasive materials. Otherwise, the surface may become
damaged.
Assembly:
Place the device on a stable, horizontal surface. Install the trays and plug the device to the mains.
The trays can be stacked at 1.4 cm or 2.5 cm intervals to adjust the space to the thickness of dried products.
TIPS: If you place two trays on one another and notice that the upper tray is touching food below it, move the
upper tray one position up (see the picture below).
A tray on a higher position
Align the plastic bumps on the inside of the lower edge of the trays with the four vertical plastic sockets
Trays in one another
Rotate the trays so that the plastic bumps on the inside of the lower edge of the trays are positioned next to the
four vertical plastic sockets.
Operation
Function buttons:
Digital controls provide easy drying temperature and time control.
1. Place the dryer on a dry, flat surface
2. Place food on the trays and load them into the device
Note: It is advisable to stack at least three trays regardless of whether there is food on them.
3. Connect the power supply. The display shows ‘0000’
4. How to set the timer and temperature
How to set the timer (00:30 – 24:00)
1) Press the
button. The display shows the default time 10:00 and blinks. Next, press
or – several times until the right time is displayed. To quickly change the time, keep or – pressed.
How to set the temperature (35°C - 40°C - 50°C - 55°C - 60°C - 65°C - 70°C - 75°C)
2) Press the () button. The display shows 70°C and blinks. Next, press or – several times until
the right temperature is displayed. To quickly change the air temperature, keep or – pressed.
5. When the time and temperature are set,
