7
Do not use this heater with a programmer, timer, separate remote-control system or any other device that
switches the heater on automatically, since a fire risk exist if the heater is covered or positioned incorrectly.
Accessible surfaces may become hot during operation.
The heater is not equipped with a device for controlling room temperature. Do not use the heater in small
rooms when they are occupied by people not able to leave the room on their own, unless a permanent
supervision is ensured
PURPOSE
This appliance is intended for household and similar applications, such as:
- kitchens in shops, offices, and other working environments
- households
- by customers in hotels, motels, and other residential environments
- lodgings, breakfast rooms, and similar environments
Parameters:
Nominal voltage
220 – 240 V
Nominal frequency
50/60 Hz
Nominal power consumption
800 W
Parts:
1. Cover
2. Base
3. Safety tip over cutoff switch
BEFORE FIRST USE
ATTENTION!
Make sure that the power source to which the appliance is to be connected is accordant with the
parameters specified on the rating plate.
Operation:
1. Plug the supply cable in a socket.
2. Turn the knob to 400 W (only one upper element will start heating)
3. Turn the knob to 800 W (two elements will start heating).
NOTE:
This device is equipped with a safety cut-off switch. In case the heater is inclined or horizontal, it will be
automatically deactivated with the use of a switch in the base part of the heater.
Maintenance:
Always pull the plug out of the mains socket before starting any maintenance work. Let the heater cool down.
Clean with a dry or slightly wet cloth. Do not pour water or other liquids onto the device; do not submerse any
part in water. Manufacturer reserves the right to change the technical parameters of the device without notice.
When the device is switched on after a long period, a burning smell may be produced by the dust on the
heating element. After some time, the smell subsides.
Technical service:
All devices undergo a thorough post production control. If you still find any fault, you can ask technical
service for help.
Before you talk to technical service, check if:
- there is power in the wall socket,
- you followed this manual when turning the device on.