Sleep mode
The sleep mode can be activated when in cool mode and heat mode.
In cool mode :
After 1 hour the preset temperature is increased by 1
ć
, after another hour the preset
temperature will again be increased by 1
ć
.
In heat mode
After 1 hour the preset temperature is decreased by 1
ć
, after another hour the preset
temperature will again be decreased by 1
ć
.
Then the temperature is kept constant for 12 hr. And all the indicators dim to dark.
The fan speed may switch over to low speed for silent operating and cannot be selected.
Timer Setting
To turn off (When power on)
Press Timer key to turn on the timer function.
Press ADD/MINUS repeatedly to set the delay OFF time
To turn on (When power off)
Press Timer key to turn on the timer function.
Press ADD/MINUS repeatedly to set the delay ON time
Cancel timer
Press ADD/MINUES repeatedly until the LED shows ‘00’.
Note:
when press POWER will also exit the timer setting
Automatic Defrost
At low room temperatures, frost may buildup at the evaporator during operation. The unit will
automatically start defrosting and the POWER LED blinking. The defrost control sequence is as
follows:
A.
When the unit operates in the cooling (cool in smart mode)
,
dehumidifying operating
mode, the ambient temperature sensor senses the evaporator coil temperature is below -
1°C , the compressor will stop operating. 10 minutes later (or the coil temperature up to
7
℃
) the unit restart to cool operating mode.
B.
When the unit operates in the heating (heat in smart mode), dehumidifying operating
mode. When the coil temperature sensor senses the temperature of the evaporator is
below 40
ć
and the differential between coil temperature and room temperature is below
19
ć
after the compressor operation for 20minutes, the unit start defrosting for 5 minutes
and the power indicator blinking.
