12
OPERATION
ATTENTION!
Make sure that the power source to which the appliance is to be connected is accordant with the
parameters specified on the rating plate.
1.
Choose a suitable location for the heater, taking into account the safety instructions above.
2.
Insert the plug of the heater into a suitable outlet (220-240V).
3.
Turn the thermostat knob clockwise until you feel detectable resistance.
4.
Switch the device on following the guidelines below. After the power level switches are on, diodes
will light up.
•
The minimum heating power - press left switch I
•
The medium heating power - press right switch II
•
The maximum heating power - both switches I and II must be on
5.
To reduce the maximum heating power, turn off one of the interim powers - the minimum or
medium one.
6.
You can control heating intensity for the selected heating power, turning the thermostat leftward
(without switching it off) or rightward to MAX position.
7.
To turn the device off, turn off the power switches, turn the thermostat to "0" level (off) and unplug
the device.
MAINTAINING THE PRESET TEMPERATURE
1.
When switching the device on, the thermostat knob should be set to the maximum level until the
required temperature is reached.
2.
After the required temperature has been reached, turn the thermostat knob slowly
counterclockwise until a red lamp goes out.
3.
Leave the thermostat in the said position.
4.
The device will switch on automatically when the temperature falls below the set one and off after
it has been reached.
OVERHEATING PROTECTION
This device has a thermostat preventing overheating.
NOTE!
If you are not able to reach the desired temperature in room, it is necessary to use next device.
CLEANING THE HEATER AND MAINTENANCE
Always un-plug the heater from the outlet. Allow it to cool down before cleaning. Clean the body of the
heater by wiping with a dry or slightly wet cloth and buff with a dry cloth. Do not use any detergents or
abrasives. Do not pour water or other liquids onto the device. Do not submerse any part in water!
Do not
allow the interior to get wet as this could create a hazard.
TRANSPORT AND STORAGE
When the heater is not used for long periods of time, it should be protected from dust and stored in a clean,
dry place. Store out of reach of children. Protect against dust, humidity, and mechanical damage. Transport
in the original packaging. Protect against dust, humidity, and mechanical damage. Always let the device cool
down prior to storage or transport.
Содержание OH-07
