Ravanson LKK-50, Руководство пользователя

Страница: 9 / 51

9
and other objects: back and sides of the fridge at least 10 cm, the top at least 20 cm. Leave enough
space to open the fridge door to the angle of 160
o
.
4. The fridge should be placed far from any heat sources (cooker, radiator, stove) and it should not be
exposed to direct sunlight.
5. The fridge cannot be located near flammable or explosive materials such as gas, petrol, alcohol etc. Do
not store the above-mentioned materials in the fridge.
6. Do not place the fridge in areas with high moisture.
7. After setting the refrigerator in a suitable place, wait at least 2h before connecting it to the power
supply.
8. Make sure that the power source to which you want to connect the device meets the specifications
given on the nameplate. This device is equipped with a grounded type plug and must be plugged into a
grounded type outlet. If any power flickers take place, connect a special device to the fridge,
controlling the power automatically.
9. The power cord should not be extended or wound when the device is on. Moreover, take care the
power cord is not placed too close to the compressor at the fridge back. The operating compressor
generates high temperature and can damage the power cord.
10. In case of accidental disconnection from the power supply wait at least 5 minutes before restarting.
First use
After connecting the refrigerator to a power source switch the thermostat knob to the position between 1 and
5. The refrigerator will start working. Close the door, after about 30 minutes the housing of the refrigerator on
the right or left side should be warm, and the temperature in the cooling chamber should decrease. This means
proper operation of the compressor.
Thermostat
Refrigerator is controlled by thermostat. In “0” position refrigerator stops working. For positions “1 to 5”, the
lower setting, the higher cooling temperature. The refrigerator should be set at a higher level for the user. The
level “5” is suitable for fast freezing. After rapid freezing it is recommended to bring the thermostat to its
normal operating position.
Preparation of ice
Pour drinking water to the ice container and put it in the freezer. Set the thermostat knob in position 4/5.
Cooling chamber
The temperature of the cooling chamber is about 0 °C - 10 °C. It is suitable for storage of vegetables, fruit,
drinks for a short time.
0-star compartment
Temperature of the 0-star compartment is below 0°C. The 0-star compartment is used for the storage of frozen
food in temperature < 0C and can be used for the ice-making and ice storage but it is not designed for the
storage of highly perishable products.
FOOD STORAGE
It is recommended to keep food in sealed containers intended for contact with food, in order to prevent
influence of other odours.
Food should not be placed too closely to allow free air flow.
Do not put hot food in the refrigerator. Cool to room temperature beforehand.
Minimize the frequency and time of opening the refrigerator door and keeping it opened.
If the food be cleaned before putting into the refrigerator, wash it, dry it and then put to the refrigerator.
DEFROSTING AND CLEANING
If the ice layer inside the fridge and freezer chambers gets about 3-5 cm thick, the device should be defrosted.
The device requires manual defrosting. To defrost you should:
Set the thermostat to "0" and unplug the device.
Remove food from the fridge and freezer chambers.
Open the door to let the ice melt. To speed up the defrosting process, you can place a bowl with hot
water on the shelf and close the door of the fridge and freezer.