Ravanson LKK-250RB, Руководство пользователя

Страница: 14 / 73

14
Brumous deposit appears on the outer part of the refrigerator. This is normal due to the high humidity. A
freezer should be dried.
Check before calling for service:
Refrigerator stopped working
- thermostat knob is not se t to ”0”.
- a plug is well inserted to the socket
- power supply is on
- the device starts working within 5 minutes after the last power off.
Refrige rator’s work i s not effective
- too much food in the fridge or food arranged too tightly which prevents air flow
- the device is set in the sun an ambient temperature is too high
- fridge located near a radiator or other heat-emitting devices
- food in the refrigerator/freezer is too warm
- not closed door of the refrigerator/freezer
- frequent opening of the door of the refrigerator/freezer
- fridge ventilation is insufficient. There can be an insufficient distance between the fridge and the surrounding
walls/furniture/other devices.
Food in the refrigerator chamber is too much chilled
- position of thermostat is too high
- food with high water content was placed directly over the cold air inlets. This is not a symptom of incorrect
device operation.
Refrigerator-freezer is too noisy
- the device is not level
- the device touches the wall.
If the above-mentioned advice does not solve the problem, contact the repair service. Don’t repair on your
own.
WARNING! If, despite compliance with the specified rules, a refrigerator-freezer is not working properly,
inform the manufacturer's authorized service centre.
WARNING! If an electric shock (tingling) is sensed after touch a refrigerator-freezer housing, immediately
turn it off and ask a certified electrician to check the protective circuit in the socket
TRANSPORTATION
Transport (carry) only in vertical position. A tilt should not exceed 45˚
Transport in a package protecting from humidity, dust and mechanical damages.
NOTE!
The illustrations and descriptions may differ from reality depending on the product model.
Manufacturer reserves the right to change the technical parameters of the device without notice.
The producer reserves the right to mistakes and misprints.
The symbol presented below indicates that the used equipment cannot be placed together with other
household waste. The user is obliged to bring this item to the waste electrical and electronic equipment
collection point where a suitable system is created to allow safe disposal of these items.
Dangerous components present in electrical and electronic equipment have negative consequences for the
environment and human health therefore correct handling of the equipment is very important. Certain
substances which may adversely affect the environment over the life of the product and after use have been limited in this
device