
24.
The device is designed for indoor use only. It cannot be used or
stored in places exposed to weather factors.
25.
Its place of operation should provide stability. The power cord
cannot run in the vicinity of hot air outlets. It cannot be bent or
crushed or run in the neighborhood of sharp edges.
26.
Do not insert any objects into the opening of the device's body.
27.
Despite proper use of the device and following all safety guidelines,
some specific residual risks cannot be completely eliminated.
28.
It must be possible to unplug the device after it is installed; access
to the plug must be provided.
29.
WARNING:
Before switching the device on, make sure that the
power characteristics comply with the parameters on the
nameplate. This heater is equipped with a grounded type plug and
must be plugged into a grounded type outlet. This is a safety
feature: DO NOT REPLACE THIS PLUG!
30.
NOTE! The device is not designed to work with external timers or a
separate remote control system.
31.
It is recommended to connect the device to the power supply
network equipped with a residual current device (RCD) with a
switch-off current of 30mA or less.
PURPOSE
The device is intended for use in domestic or similar environments, such as:
- offices and other working environments
- use by clients in hotels, motels and other residential environments
OPERATION
ATTENTION!
Make sure that the power source to which the appliance is to be connected is accordant with
the parameters specified on the rating plate.
It is normal for the heater to emit some odor when it is turned on for the first time, or after having not been
used for a long period of time. A burning smell may be produced by the dust on the heating element. This will
disappear when the heater has been on a short while.
Always remember to keep a safety distance (minimum 100 cm) from walls or other objects. Airflow cannot be
blocked!
1.
Choose a suitable location for the heater, taking into account the safety instructions above.
2.
Insert the plug of the heater into a suitable outlet (220-240V).
3.
Turn the thermostat control hand-wheel clockwise to maximum.
4.
To set heating to minimum turn the hand-wheel (clockwise) to position
I
(1000W).
5.
To set heating to maximum turn the hand-wheel to position
II
(2000W).
6.
To set the fan functions set the hand-wheel to position
7.
To switch the device off, turn the control hand-wheel (counterclockwise) to position