Ravanson CH-2000M, Руководство пользователя

Страница: 14 / 69

14
OPERATION
It is normal for the heater to emit some odor when it is turned on for the first time, or after having not been
used for a long period of time. A burning smell may be produced by the dust on the heating element. This
will disappear when the heater has been on a short while.
1. Choose a suitable location for the heater, taking into account the safety instructions above.
2. Insert the plug of the heater into a suitable outlet (220-240V).
3. Once you plug the device in, switch the thermostat on by turning it slightly to the right until you hear
a characteristic clicking sound.
4. Then put the thermostat in the selected position turning it further right.
5. You may adjust the device's power by means of the power switches on the side of the heater: (*)
750W – minimum power, (**) 1250W – medium power, (***) 2000W – maximum power. For
maximum power 2000W - both switches should be on.
6. Once the heat output control knobs are on, control lights will be lit.
7. When the device heating elements heat to the values set by the User, the convection heater will
switch off and when the heating elements’ temperature falls down, it will automatically switch on.
8. You can control the heating intensity for the selected heat output by turning the thermostat left
(without switching it off, you will hear a characteristic clicking sound) and to the right to MAX position.
9. You can enable TURBO function to switch on the additional air supply which will shorten the heating
phase (for models CH-2000MT and CH-2000RT).
NOTE!
If you are not able to reach the desired temperature in room, it is necessary to use next device.
OVERHEATING PROTECTION
This device is equipped with fuse preventing overheating.
WARNING!
In the event that the thermal fuse is automatically engaged and the device is turned off due to the danger
of overheating, it is necessary to disconnect the power cord from power source and to wait approx. 15 minutes
until the device cools down. Only then will it be possible to turn it on again.
CLEANING THE HEATER AND MAINTENANCE
•
Always un-plug the heater from the outlet.
•
Allow it to cool down before cleaning.
•
Clean the outside of the heater by wiping with a dry or slightly wet cloth and buff with a dry cloth.
Do not use any detergents or abrasives and do not allow any water to enter the heater.
DO NOT:
•
Install the device near furniture, curtains, below shelves, inside walls.
•
Cover the device when it is turned on
TRANSPORT AND STORAGE
•
When the heater is not used for long periods of time, it should be protected from dust and stored
in a clean, dry place.
•
Store out of reach of children. Protect against dust, humidity, and mechanical damage.
•
Transport in the original packaging. Protect against dust, humidity, and mechanical damage.
•
Always let the device cool down prior to storage or transport.
FAILURES
If any damage is disclosed after purchase, contact the seller.
Follow the rules in this manual.
Do not modify the product.