OPERATION INSTRUCTION
Operation panel
1. Buttons
On/off Button
When plug in the socket, there’s a beep sound while all indicator lights on the panel lightened and
then extinguished, representing the appliance in standby mode. Turn on the appliance by pressing
(On/Off button), in the defaulted standard fan speed in
(Middle speed). Press this button
again to turn it off. All lights are off and the appliance back to standby mode. Hold the on/off button
in 5 seconds; it will turn off both the air quality indicator light and PM2.5 display.
Fan Speed Button
Press
(Air Flow) to adjust the fan speed. Button operation as follow: (supposed the current
speed is middle), each pressing cycled as
(Middle)
(Strong)
(Super)
(Auto)
(Silent)
(Middle), and corresponding light is turned on one by one.
Ion Button
Press
(Ionic) button to turn on the ion mode and corresponding light is on. Press once again to
turn it off. The appliance releases ions to purify the indoor air when in Ion mode.
Humidity
if the indicator light is turned off, it shows that there is no water in the water tank. After adding
water to reach the regulation water level, the indicator light is on while It is in humidification state.
Timer Button
Press
(Timer button) to set the timer(1/4/8 hours), with corresponding light is turned on one
by one. Button operation as follow: (supposed the current speed is
), each pressing cycled
as
Timer Cancel.
Sleep Mode Button
Press
(Sleep Mode button) to turn on the sleep mode and corresponding light is on. Press
once again to turn it off.
Child Lock Button
Hold
(Child Lock button) for 3 seconds to activate the lock function and corresponding light is
on. The control panel is locked meaning that other buttons are invalid. Hold for another 3 seconds to
deactivate it. The appliance returns to normal operation.
Reset Button
