Ravaglioli RAV TD8060TWS Скачать руководство пользователя страница 53

Страница: 53 / 66

INSTRUCTION MANUAL

RAV TD8060TWS - RAV TD8060TWSR
RAV TD8080TWS - RAV TD8080TWSR

Code M0230 - rev.1.1

(01/2014)

RAVAGLIOLI S.p.A.

RAVAGLIOLI S.p.A.

– 40044 Pontecchio Marconi (BO) Via I Maggio, 3

Page 51/ 64

Tel. (+39) 051/ 67.81.511 – Fax (+39) 051/ 84.64.67

e-mail:

[email protected]

/http www.ravaglioli.com

Turn the steering until the wheels are aligned,

meaning until the display unit level is perfectly at

centre.

Level again the Front heads (mounted on the 1

steering axle), leaving the rear sensor in their

position, and wait until automatically appear the

next page.

Move the Front sensor heads from 1

steering

axle to the 2

, then press F4.

Note: It is possible to skip the steering procedure

on this axle by pressing F2, or skip all the axles

remained going directly in the summary page

pressing F3.

Important: Keep the steering wheel and/or

steering box stopped.

Level again the Front heads (mounted on the 2

steering axle), leaving the rear sensor in their

position, and wait until automatically appear the

next page.

Perform the steering procedure for the 2

steering axle following the display unit level on

the screen, first left then right then at centre.

The steering procedure can also be jumped by

F4 ; the Caster data measurements will not

appear.

Содержание RAV TD8060TWS



































































Результаты поиска

Содержание RAV TD8060TWS

Отзывы:

Ravaglioli RAV TD8060TWS, Инструкция по эксплуатации, Страница: 53 / 66

Результаты поиска

Содержание RAV TD8060TWS

Отзывы: