rav KT100, Руководство по эксплуатации

Страница: 33 / 120

33
KT100_KT100XT_(0970M00100)_R1_UN_00
4.3 Shifting/Tilting
• Place yourself in front of the equip-ment
• The locking devices of the wheels are
still on
• To shift or tilt the platform place a span-
ner upon the top of the relevant spindle
or at the side of the frame
• Now turn the spindle according to the
symbols affixed to move the plat-form
into the position desired
Make sure to note the load eve-
ry time you shift the platform to
pre-vent unwanted and dange-
rous changes in position in time.
4 Uso
Footpedal
Raise
Lower
Lowering- pedal
Footpedal
Fig. 9:
Danger
• Fold foot pedal away when not
in use
• Wear safety shoes with none
slip sole
• No personnel should be within
the danger zone when raising
or low-ering the table
• Observe the picture symbols
on the lifting machine
4.1 Lifting
• Stand in front of the machine
• Hold the handle firmly
• Apply the wheel brakes
• Fold down the foot pedal
• Pump the pedal repeatedly down-wards
until the required height is achieved
• You should not travel with the ma-chi-
ne when it is loaded
4.2 Lowering
• Stand in front of the machine
• Hold the handle firmly
• The wheel brakes are already applied
• Hold the lowering pedal carefully down
Don`t hold the lowering pedal ful-ly
down when the table is loaded
otherwise the load will lower too
quickly.