Rauch QUANTRON-K2, Инструкция по эксплуатации

Страница: 36 / 102

Operation QUANTRON-K2 4
30
Submenu Meaning/possible values Description
Spreading materi-
al name Manually entering the name of a new
spreading material.
Characteristic
curve Selection of one of six spreading materials
or spreading material types for determin-
ing the mass flow characteristic:

Fine salt

Coarse salt

Damp salt

Sand

Grit

Fertiliser
Spreading density Entering of the spreading density based
on the pre-selected characteristic curve.
Spreading width Entry of the spreading width (working
width). Page 32
Flow factor Entry of the flow factor for the spreading
material used. Page 33
Disc speed Selection of the disc speed. Page 34
Calibration Execution of the calibration and new
calculation of the flow factor. Page 35
Half-side slide Entry of the positioning values for the half-
side slide. Page 38
Spreading
d/- Specification of the step size by which the
spreading density can be manually
increased or decreased later. Page 39
Spreading
material list Management of fertiliser charts. Page 40