Rauch AXENT Series, Руководство оператора

Страница: 16 / 170

Safety 3
10
3.5.5 Operation

If the machine malfunctions, stop the machine immediately and secure it.
The fault is to be rectified immediately by qualified staff.

Never climb onto the machine while the spreader unit is running.

Rotating machine components can cause serious injuries. Never come close
to rotating parts with body parts or clothing.

Do not deposit any external parts (such as screws, nuts) in the container.

Ejected spreading material can cause severe injuries (e. g. to the eyes). For
this reason, ensure that nobody is within the overload area of the machine.

Never climb onto the machine or the tractor when it is situated beneath high-
voltage electrical power lines.

Never open or close the hopper cover when the machine is under
high-voltage electrical power lines.
3.5.6 Wheels and brakes
The chassis of the towed machine is exposed to high loads due to the high total
weight and the driving terrain. To ensure operational safety, pay particular atten-
tion to the following points:

Use only wheels and tyres that meet the technical requirements defined by
the manufacturer.

The wheels must not exhibit any lateral run-out or impermissible offset.

Check the inside and outside of the tyres at the edges. Replace them
immediately if they are damaged (bumps, scratches).

Check the tyre pressure and the function of the brake each time before driving.

Have the brake pads replaced in good time. Use only brake pads that meet
the technical requirements defined by the manufacturer.

To avoid soiling of the wheel bearings, they must always be covered by the
dust caps.

Observe the permissible load capacity of the wheels (note the entry in the
type approval).

Never use the joystick of the tractor for braking . In this case, the
compressed air-braked trailers will not brake.