Rauch AXENT 100.1, Дополнительные инструкции

Страница: 56 / 114

Sub-menu Meaning Description
Manual mode 4.7.8 Opening adjustment
No function in lime operation
Pre-metering (mm) To be entered in a separate
input window.
No function in lime operation
+/- opening (%) Pre-setting of the opening
adjustment for pre-metering slide To be entered in a separate
input window.
No function in lime operation
Belt speed (mm/s) Setting the conveyor belt speed 4.7.5 Belt speed
No function in lime operation
+/- belt sp (mm/s) Pre-setting of the speed
adjustment for the conveyor belt To be entered in a separate
input window
No function in lime operation
2 application rates Only when working with
application maps: Activation of
two separate application rates
for the right and left side,
respectively
4.7.1 AUTO/MAN mode
The machine control unit automatically adjusts the dosing quantity according to the speed signal. This
adjustment is influenced by the application rate, working width, and flow factor.
By default, the unit is operated in the automatic mode.
You only work in manual mode in the following cases:
• If there is no speed signal (radar or wheel sensor not available or defective)
• Application of slug pellets or seeds (fine seeds)
For uniform spreading of the spreading material, a constant forward speed must be applied in
manual operating mode.
Spreading in different operating modes is described in 5 Spreading operation with AXIS-
PowerPack .
4. Operation
56
5901646 AXENT ISOBUS