Rattler 369D, Руководство пользователя

Страница: 40 / 63

37
© 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
4 4 P PA AR RK KIIN NG G L LIIG GH HT TSS F FL LA ASSH HIIN NG G//C CO ON NSST TA AN NT T:: In the
default setting, the unit will flash the vehicle’s parking lights
while remote started. The constant setting will turn the parking
lights on solidly for the entire run duration.
5 5 C CR RA AN NK K T TIIM ME E 0 0..6 6//0 0..8 8//1 1..0 0//1 1..2 2//1 1..4 4//1 1..6 6//1 1..8 8//2 2..0 0//4 4..0 0:: If
Feature 2 is programmed to the voltage sense setting, the crank
time must be set to the appropriate duration. The default setting
is 0.6 second. If a different crank time is desired, select Feature
5 and (while pressing the Program switch) press the Channel
Two button to advance through the LED Off settings. The unit
will flash the LED to indicate which time is selected. Once the
4.0 second setting is reached the next press of the Channel Two
button will reset the system to the shortest setting.
6 6 V VO OL LT TA AG GE E C CH HE EC CK K L LE EV VE EL L H HIIG GH H//L LO OW W:: This feature only
functions when Feature 2 is programmed to voltage sense. Some
vehicles have many accessories, which are turned on when
remote started. In these vehicles, the variation of voltage
between the engine off and the vehicle running is very slight and
the remote start unit may “think” the vehicle has not started.
This can cause the remote start to shut down after the vehicle
has been started. If this is the case, program this feature to the
LOW position.
7 7 SSH HO OR RT T R RU UN N ((T TU UR RB BO O T TIIM ME ER R)):: When the and
buttons on the transmitter are pressed simultaneously while the
engine is running, the vehicle will continue to run for the short
run time. The factory default is 1 minute.