80
6.You will see the screen below. Select [Initialize/Format media] from the [Edit] menu.
7.You will see the Initialize/Format screen below. Select format type. If you want to do Low Level
Format simultaneously, check [Low Level Format]. Then, click [OK].
(Caution)
You can do low level format only for a
HDD, MO which is converted from
SCSI interface to IEEE1394 interface.
If you get an error message saying you
failed to initialize when you do low level
format, the IEEE1394(FireWire) device
itself can not treat low level format. In
this case, don't put a check mark at
[Low level format] when you format the
device.
