30
4-4-5 Flywheel
①
Disassembly:
a) Clamp the flywheel by flywheel brake
available in the market, remove flywheel
brake (M16).
b) Disassemble the flywheel by flywheel
puller available in the market
The flywheel shall not be hit by
hammer
The magnet steel on the flywheel shall
be evaded when placing the puller.
②
Assembly
a)
Before assembling, clean dirt, oil,
grease and other foreign substances on the crankcase and tapering part of the flywheel. Make
sure that magnetic steel part of the flywheel is not stuck with gaskets or other foreign
substances;
b)
Assemble the key into crankshaft keyway
c)
Assemble the flywheel on the crankshaft
It is possible that the flywheel may push semicircular key out of the
keyway, which shall be confirmed after the assembly.
Flywheel (cast iron)
Flywheel brake
Flywheel
Flywheel puller
