Rato R160, Руководство по обслуживанию

Страница: 53 / 78

51
FLYWHHL
(CAST IRON)
HOLE
HOLE
IMPELLER
LUG
LUG
STARTER CUP
(Secondary side)
Measure the resistance of the secondary side of the coil with the
spark plug cap removed, touch one test lead to the high tension cord
while touching the other test lead to the coil’s iron core.
Secondary side resistance value
：
5-7k Ω (recommended value)
Measure the resistance of the spark plug cap by attaching one
ohmmeter lead to the wire end of the plug cap while touching the
other test lead to the spark plug end.
Resistance value
：
5k Ω ±5%/10k Ω ±5%( recommended value)
Flywheel (cast iron)
Ÿ Assemble by aligning the four small holes in the flywheel.
Ÿ
Assemble by aligning the lug on the rear side of the starter pulley with the small hole at
the center of the flywheel.