4
[EN]
Control Panel
1.
MODE: _____________
Selection of counting modes.
Mix: _______________
(T 225 | T 275) Counting of unsorted banknotes including value counting and
counterfeit detection.
Sort: _______________ (T 225 | T 275) Counting of sorted banknotes including value counting and
counterfeit detection. The first banknote counted is used as a reference value.
If there are banknotes from different denomination in the stack, the device
will stop immediately.
Check: _____________ (T200) Counting of sorted banknotes including counterfeit detection.
Count: ______________ Counting of sorted banknotes without counterfeit detection, e.g. foreign cur-
rencies.
2.
ADD: _______________
Activate or deactivate the function ADD
No: ________________ Once the counting procedure is completed, the result is deleted as soon as you
remove all the banknotes from the banknote stacker.
Yes: ________________ The counting result will be saved. Each further counting procedure is added to
the previous counted value. The added value is deleled by pressing the RESET
button.
3.
SPEED:_____________
Selection of the counting speed
Low: _______________ The device counts approx. 800 banknotes/minute.
High: _______________ The device counts approx. 1.000 banknotes/minute.
Advice:
The more heavily worn the banknotes counted are, the slower the
counting speed should be.
4.
REPORT: ____________
Counting results and printing
Quick keypress: ______ Show the counting results.
Long keypress: ______
(T 225 | T 275) Print counting result via optionally available Thermal receipt
printer RTP 300.
5.
CURR: ______________
Change currency (if available)
The currency is shown on the display next to the CURR button, e.g. EURO.
6.
BATCH: _____________
The bundle function allows you to count an exact number of banknotes as a
bundle, e.g. bank wrapper.
The function is activated using the BATCH button. After pressing the button,
you can select from a series of predifined values: 100 | 50 | 20 | 10 | 5 | 0
1.
3.
2.
4.
5.
7.
8.
9.
10.
