background image

Care, inspection, maintenance and repair

13 / 72

In order to retain the high quality of the stainless steel, for hygienic reasons and to avoid

interferences to operation, the appliance must be cleaned daily or when prompted to clean.

Follow the instructions in the "Efficient CareControl" section.

Constant  operation  at  high  cooking  chamber  temperatures  (≥  260°C),  the  use  of  high

browning levels (browning 4/5) and preparation of food with high fat and gelatin content can

subject the cooking chamber seal to faster wear.

Cleaning the cooking chamber seal daily with a non-abrasive rinsing agent will prolong the

service life.

Warning!

If the appliance is not cleaned or is not cleaned well enough, deposits of grease or

food residues in the cooking chamber may catch fire - Risk of fire.

-

If fat deposits and/or food waste in the cooking chamber ignite, shut down the appliance

immediately  and  keep  the  cooking  chamber  door  closed  to  put  out  the  fire!  If  further

extinguishing  is  required,  disconnect  the  appliance  from  the  mains  and  use  a  fire

extinguisher (do not use water to extinguish a fat fire!).

-

To avoid corrosion in the cooking chamber, your appliance must be cleaned every day,

even if it is only operated in “Moist Heat” (steaming) mode.

-

Apply vegetable oil or grease to the inside of the cooking chamber at regular intervals

(every 2 weeks or so) to prevent corrosion.

-

Do  not  use  a  high  pressure  cleaner,  steam  cleaner  or  a  direct  water  jet  to  clean  the

appliance. Observe the protection class IPx5.

-

Do  not  treat  the  appliance  with  acids  or  expose  to  acid  fumes  –  this  will  damage  the

passivated coating of the nickel-chromium steel and the appliances might discolour.

-

To clean the exterior panelling, only use mild household cleaning agents such as washing-

up liquid on a damp soft cloth. Corrosive or irritating substances must not be used.

-

Only use cleaning agents from the appliance manufacturer. Cleaning agents from other

manufacturers can damage the appliance. Damage to a device that has been caused by

using different cleaning and care products than those recommended by the manufacturer

is not covered under warranty.

-

Do not use scouring products or abrasive cleaning agents.

 

Содержание SelfCookingCenter series









































































Отзывы: