Rational SCC WE 61G, Руководство по установке

Страница: 5 / 44

- 5 - V-09 05/2014
Installation instructions / Changing air filter
Attention:
Follow the local standards and valid instructions. Damages based on installation not complying with the direc-
tives given hereunder are not covered by warranty terms.
The required connections (water, drain, electric and gas) as well as maintenance and
servicing may only be carried out by trained/qualified personal in accordance with the local regulations.
Liability
Installation and repair works, not carried out by qualified personnel or not using original spare parts, as well
as every technical change on the unit which were not authorised by the manufacturer will lead to an expira-
tion of the warranty and the liability of the manufacturer.
The conformity of the unit references to the complete appliance at the time of shipment.
In case function extension and/or connection of additional functions are made the user is responsible for an
extended conformity.
Check for any transport damage.
Should there be any signs of transport damage, inform your dealer/freight forwarder
immediately! Remove all cartons, packing materials, documents, etc. from the exterior AND interior cabinet.
Cleaning of the unit body after installation:
With the cleaning cloth, attached to the door handle, the body of the unit can be cleaned.
As the cleaning cloth is soaked with cleaning agent it must not be used for cleaning of the door glass pane
and the operator surface (also follow the hint on the packaging of the cleaning cloth).
Discarding of old units.
At the end of its service life, the unit must not be disposed of with the general waste and must not be placed
in the recycling containers at local authority collection points.
We will be happy to help you with the disposal of your unit.
Changing air filter
In case the unit detects a contaminated air filter, a message is shown that prompts the operator to change
the filter. When changing the filter the following procedure has to be observed:
Units 6x1/1GN, 6x2/1GN, 10x1/1GN and 10x2/1GN
Air filter article number: 40.03.461
The filter may be changed by the operator. The operator is responsible that the new filter is set in place cor-
rectly and that it is not allowed to run the unit without filter. For changing the filter follow the instruction in the
operator manual.
Units 20x1/1GN and 20x2/1GN
The filter may only be changed by qualified technical personal
Attention, the hose/water protection of 20x1/1GN and 20x2/1GN units is only ensured with a correctly
installed air filter and protective cover.