Rational iVario, Оригинальное руководство по установке

Страница: 19 / 120

4 | Installation
en
80.51.915_iVario-iVarioPro-VCC_WiFi-Adapter_IM_EU-west 19 / 120
4.2.4 Testing the WiFi adapter
NOTICE
Test the connection of the WiFi
adapter. If incorrect settings have been
made, the settings must be adjusted or
the WiFi adapter reset.
n
Use the magnet (reed contact) to
reset the WiFi adapter.
4.2.5 Configuration of the Wi-Fi adapter
via the provided radio network
In Repeater mode, adjustments to the con-
figuration can be made wirelessly via the
provided radio network. To do this, log in
from a terminal that is connected to the
provided radio network (see
} Use as a re-
peater to expand existing WiFi coverage ).
Make any adjustments.
4.3 Reset to factory settings
The WiFi adapter is reset to the factory
default with use of a magnet. To reset the
WiFi adapter, hold the magnet briefly in
the middle between the two antennas
above the LEDs until they flash at the same
time. Then wait a few seconds and then
start the configuration again.
4.4 Updating the firmware
a
The WiFi adapter is connected to the
computer.
a
There is a firmware file with the exten-
sion *.bin on the computer.
1. Get the latest firmware from the RA-
TIONAL customer service and the ser-
vice partner portal.
Logging in
1. Open a web browser and enter the ad-
dress https://192.168.11.1 or another
previously set IP address. Accept the
necessary certificates.
2. Enter the username and password. By
default the username is root and the
password is Rational [ Photo 15 ].
>
Press the Login display text.
Update firmware
1. Select the System/Update Firmware
button.
2. Confirm the Update firmware display
text.
3. Click the Browse display text. Select
the firmware file saved on the com-
puter.
4. Click the Upload display text.
5. Remove the check in the Maintain set-
tings field.
>
The settings are reset.
6. Confirm the update by clicking on the
Continue button.
>
Wait until the green LED goes out.
The blue LED lights up.
>
The unit must not be switched off.
7. Wait a few minutes for the green LED
to flash. The unit is accessible again.
Log in again.
>>
The firmware has been successfully
updated.