30
TECHNICAL DATA
Type
PSC190D1 (PSC - designation of machinery, representative of Circular Saw )
Voltage
230-240V~50Hz
Power input
1400W
No load speed
4800/min
Max. cutting capacity
90°
65mm
45°
45mm
Bevel capacity
0-45°
Blade size
190mm
Bore size
30mm
Protection class
/II
Weight
3.8kg
NOISE INfOrMATION
A weighted sound pressure
L
pA
: 99dB(A)
A weighted sound power
L
wA
: 110dB(A)
K
PA
& K
WA
3.0dB(A)
Wear ear protection.
vIbrATION INfOrMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Cutting wood
Vibration emission value a
h,W
= 3.1 m/s²
Uncertainty K = 1.5m/s²
WARNING:
The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING:
To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
