32
*
Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA
Type
PRO XF2350(PGA-designation of machinery, representative of Angle Grinder)
Rated voltage
230-240V ~ 50Hz
Rated power input
2350W
Speed control adjustment
6500/min
Diameter of grinding wheels
230mm
Critical dimensions
Disc size
230mm
Disc bore
22.2mm
Spindle thread
M14
Machinery weight
4.4 kg
Protection degree
/II
NOISE INFORMATION
A weighted sound pressure
L
pA
: 93.8 dB(A)
A weighted sound power
L
wA
: 104.8dB(A)
K
PA
& K
WA
3.0 dB(A)
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
surface grinding
Vibration emission value a
h,AG
= 7.507 m/s2
Uncertainty K = 1.5m/s²
The declared vibration total value has been measured in accordance with a standard test method and
may be used for comparing one tool with another;
The declared vibration total value may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
WARNING:
To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
