9
you do not know and accept that kind of risk, do not use the Ratio® CC Transmitter.
Refer to your instructor or to your diving certification agency to get instructions about how to manage High pressure ports.
IMPORTANT WARINIG: THIS IS NOT THE MANUAL OF THE DIVE COMPUTER,
this is the manual of the Ratio® CC Transmitter
(an accessory of the dive computer). It is mandatory to read the “Warnings” of the manual of the Ratio® dive computer before
to dive! The User manual of your Ratio® dive computer is available on: www.ratio-computers.com/support
Care and Maintenance
• Keep the CC Transmitter clean and dry. DO NOT expose the CC Transmitter to chemical agents, alcohol included.
To clean the CC Transmitter use exclusively fresh water, removing all salt sediments. Leave the CC Transmitter dry naturally,
without using cold or warm air jets.
WARNING: Clean the CC Transmistter when plugged to the first stage. The pressure hole of the CC Transmitter have to be
protected from the water. Washing the CC Transmitter unplugged from the first stage can cause flooding.
If not assembled to the first stage always place the protection cap to the CC Transmitter.
• Do not expose the CC Transmitter to the sun directly or to heat sources higher than 50°C. Store the CC Transmitter in a fresh
(5°C-25°C) and dry place.
• Do not attempt to open, modify or repair the CC Transmitter by yourself. You must always address to a RATIO service center.
• The warranty is void if the seals of the CC Transmitter are broken.
• Do not put the CC Transmitter inside a hyperbaric chamber.
• The RATIO iDive computer is designed to be waterproof in sea water but, at the end of every dive, it must be well rinsed in
fresh water and it must not be dried exposing it at the direct sun light or at heat sources.
• Make sure that there is no humidity signs inside unit
WARINING: Do not try to open the CC Transmitter for any reason.
Any problem, turn to a RATIO® authorised center or to RATIO® Computers support.