21
The CC Transmitter after the dive
The CC Transmitter will automatically turn off 30 seconds after no pressure is detected.
(Close the tank’s valve and purge the pressure from the second stage)
To clean the CC Transmitter use exclusively fresh water, removing all salt sediments. Leave the CC Transmitter dry naturally,
without using cold or warm air jets.
WARNING: Clean the CC Transmitter only when plugged to the first stage.
The pressure hole of the CC Transmitter have
to be protected from the water. Washing the CC Transmitter unplugged from the first stage can cause flooding.
You can choose to left the CC Transmitter installed on your first stage or to disassemble it from the first stage.
If not assembled to the first stage always place the protection cap to the CC Transmitter.
Always protect the CC Transmitter from impacts, falls or similar (refer to “care and maintenance” on this manual)