19
When connecting the USB cable to recharge the device, the symbol => will appear in the watch screen within 45 seconds.
It means that recharging procedure is in progress. When the recharge is finished the symbol => will disappear.
Once the battery charge is finished, even if the device remains connected to the plug, the computer automatically
interrupts the electricity flow. In case the device is left in charge more than necessary (e.g. all night long), you could find it
switched off. You can check the computer charge level pressing any button; the battery percentage can be visualised on
the screen’s left upper corner.
If the device is in charge and no button is pressed for more than 10 minutes, the back light is reduced to the minimum, to
allow a faster recharge cycle.
If the recharge cycle is not completed, the battery indicator might not be precise until the next complete recharge cycle is
carried out.
After having installed one APP or having updated the operative system, we recommend to carry out a complete battery
charge cycle. After every update the RATIO iX3M always shows the sentence “battery out of power, recharge”.
Attention: Do not leave the iX3M completely without charge for a long period (e.g. 4-5 months). This may
damage the battery. The iX3M registers an alarm if left without charge for long time.
This event is not covered by warranty.
