rastar mercedes-benz slk, Инструкция по эксплуатации

Страница: 6 / 14

2
、
Install battery and power supply
1
）
Install battery(11) on the battery position.
2
）
Put battery cover(16) onto two screws holes; lock up with screw(18).
3
）
Plug the interface to the jack, connect the red terminal and the Black terminal
respectively to the anode and cathode of battery. (Notice: make sure they are
correctly connected, red to red, black to black, otherwise, it will cause short-circuit.)
4
）
Install the battery cover(12) and fasten the cover with screws(18).
5
）
Replace or take out the storage battery and power
4.1
）
Loosen the 2 screws(18) on battery cover(12)
4.2
）
Unplug the interface and jack, loosen the 2 screws(18) on battery locker(16), then
the storage battery can be taken out.
3
、
Install seat
1）
Put the seat (8) to the designated position, fix the front buckles of seat to the
grooves of car body.
2）
Vertically press down the seat until its rear buckles are fixed to the side grooves.
Notice: This seat is equipped with seat belt, which is only a decoration to develop the
safety sense of children, it can not provide any substantial protection.
Front buckle
Rear buckle
Groove Groove
Side groove
Battery
position
Picture1
Interface
Jack
Picture2
11
16
18
18
12
5