Raspberry Pi PICADE 3D, Инструкция по сборке

Страница: 22 / 35

Part 2.5 – Optional Backplate with HDMI
If you printed out the HDMI Backplate you have to prepare the micro HDMI to HDMI Cable
First. Take some sandpaper and sand down the sides if they are too tight. Just a small
amount on both sides.
Part 3 – We need some Raspberry Pi’s here
In this Step we are going to bring our Raspberry and the Picade Hat X in Place. Dont
forget the Fan to cool down the Pi. This is essential because the Pi is getting really hot
when emulate 3D Games
. So lets go…
Before screwing the Pi onto the Baseplate, gently screw those M3 screws through the Pi
Holes. The Pi comes with M2.5 screws, so we have to widen them to fit M3 screws.
Be very careful in this step as it can Damage your Raspberry Pi!