RASOR GRT86, Руководство по сборке и использованию, Страница: 6 / 16

4. PRODUCT DESCRIPTION
The fixture described in this manual is a small cutting unit model GRT86 which can be
assembled on automatic machines (e.g. spreaders, computerized cutting) by means of
proper holes located in the motor support.
GRT86 can operate continuously and it can cut at various heights by means of multiple
installation.
By cutting with the blade and the counterblade always in contact and thanks to the steel
upper quality of the blade supplied, GRT86 guarantees the clean separation without frayings
of the two borders of the cut material. The three-phase motor with extremely compact
dimensions and extreme reliability with 86 mm diameter blades, guarantees cuts with
thickness up to 2.5 cm. A sharpener assembled on the cutting unit head allows whetting
the blade at any moment without disassembling it. After carrying out this operation, it is
possible to start cutting again. A high power motor, perfectly balanced, with a high number
of revolutions and totally free of maintenance, reduces the vibrations to the minimum, thus
making the cutting unit complies with Italian Legislative Decree No. 187 dated 19/8/2005,
which adopts European Directive No. 2002/44/CE concerning the risks deriving from
mechanical vibrations.The mechanical parts are made of high resistance steel, bronze and aluminium
and require lubrication after several working hours.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1 Connector block 8 Nylon base
2 Motor cover 9 Poligonal blade
3 Cable gland 10 Spring locking the thread
4 Motor frame 11 Greaser
5 Sharpening lever 12 Fixed back protection
6 Grinding wheel adjustment 13 Hard metal counterblade
7 Movable front protection 14
Motor metal lower with assembly
holes
Device components
Enfocus Software - Customer Support
EN
22