EN
6
4. PRODUCT DESCRIPTION
The fixture described in this manual is a cutting unit model DD120LC which can be assembled
on automatic machines (e.g. spreaders, computerized cutting) by means of proper holes
located in the motor rest.
DD120LC can operate continuously at very high speeds and it can cut at various heights by
means of multiple installation.
Thanks to the sliding foot and to the steel upper quality of the blade supplied, DD120LC is
suitable for textile applications, especially for natural fibres, mattresses and sponges, during
production process. The three-phase motor, with extremely compact dimensions and extreme
reliability with 120 mm diameter blades, guarantees cuts with thickness up to 50 mm, also
for multiple layers.
A sharpener assembled on the cutting unit head allows whetting the blade at any moment
without disassembling it. After carrying out this operation, it is possible to start cutting again.
A high power motor, perfectly balanced, with a high number of revolutions and totally free of
maintenance, reduces the vibrations to the minimum, thus making the cutting unit comply
with European Directive No. 2002/44/EC concerning the risks deriving from mechanical
vibrations.The mechanical parts are made of high resistance steel, bronze and aluminium.
1
Connector block
8
Circular blade
2
Motor frame
9
Sliding foot
3
Feed cable
10
Aluminium base covered with
Teflon
â
4
Motor cover
11
Left aluminium protection cover
5
Sharpening button
12
Adjusting knob for left
protection cover
6
Adjusting knob for right
protection cover
13
Motor rest
7
Right aluminium protection
cover
14
Cable gland
Device components
1
2
4
3
14
6
10
9
11
7
5
13
12
8
