12
Introduction for buttons on remote controller
●
Please put the remote controller near user when this function is set. Do not put
the remote controller near the object of high temperature or low temperature in
order to avoid detecting inaccurate ambient temperature. When I FEEL function
is turned on, the remote controller should be put within the area where indoor
unit can receive the signal sent by the remote controller.
resumes displaying. Cancel TIMER ON: Under the condition that TIMER ON is
started up, press "TIMER ON" button to cancel it.
TIMER OFF button
"TIMER OFF" button can set the time for timer off. After pressing this button, " "
icon disappears and the word "OFF" on remote controller blinks. Press "▲" or
▲
" " button to adjust TIMER OFF setting.
After each pressing "▲" or " " button,
▲
TIMER OFF setting will increase or decrease 1min. Hold "▲" or "
▲
" button, 2s
later, the time will change quickly until reaching your required time.
Press "TIMER OFF" word "OFF" will stop blinking. " " icon resumes displaying.
Cancel TIMER OFF. Under the condition that TIMER OFF is started up, press
"TIMER OFF" button to cancel it.
●
this button again within 2s, the change of swing status will also depend on the
circulation sequence stated above.
8
SLEEP button
Under COOL, HEAT or DRY mode, press this button to start up sleep function.
" " icon is displayed on remote controller
. Press this button again to cancel sleep
function and " " icon will disappear
. After powered on,
Sleep Off is defaulted.
After
the unit is turned off, the Sleep function is canceled.
In this mode, set temperature will be adjusted with the change of time. Under Fan
and Auto modes, this function is not available.
9
I FEEL button
Press this button to start I FEEL function and " " will be displayed on the remote
controller. After this function is set, the remote controller will send the detected
ambient temperature to the controller and the unit will automatically adjust the
indoor temperature according to the detected temperature. Press this button again
to close I FEEL function and " " will disappear.
TIMER ON button
"TIMER ON" button can set the time for timer on. After pressing this button, " "
icon disappears and the word "ON" on remote controller blinks. Press "▲" or
"
▲
" button to adjust TIMER ON setting. After each pressing
▲
"▲" or " " button,
TIMER ON setting will increase or decrease 1min. Hold "▲" or " " button, 2s
▲
later, the time will change quickly until reaching your required time.
10
TIMER ON / TIMER OFF button
●
