1
0
Introduction for buttons on remote controller
FAN button
3
Note:
● Under
AU
T
O speed, air conditioner will select proper fan speed automatically
according to ex-factory setting.
● Fan speed under dry mode is low speed.
Note:
●
A
fter starting up heating mode, indoor unit will delay 1~5 minutes to blow
air (actual delay time is depend on indoor ambient temperature).
● Set temperature range from remote controller: 16~30
℃
(61-86°F);
Fan speed: auto, low speed, medium speed, high speed.
TURBO butto
n
4
Under
COOL
or
HEAT
mode,
pres
s
this
button to
turn
to
quick
COOL
or
quick
HEAT
mode. " " icon is displayed on remote controller. Press this button again
to exit turbo function and " " icon will disappear.
If
start
this
function,
the
unit
will
run
at
super-high
fan
speed
to
cool
or
heat
quickly
so that the ambient temp. approachs the preset temp. as soon as possible.
▲
▲/ button
5
▲
● Press "▲" or " " button once increase or decrease set temperature 1
℃
(°F).
Holding "▲" or " " button, 2s later, set temperature on remote controller will
tor on indoor unit will change accordingly. (
T
emperature can’t be adjusted under
auto mode)
● When setting
TIMER ON,
TIMER OFF or CLOCK, press "▲" or " " button to
adjust time. (Refer to CLOCK,
TIMER ON,
TIMER OFF buttons)
▲
▲
Pres
s
ing
t
his
button
can
s
et fan
speed
circularly as: au
to
(
A
U
TO
), low(
),
medium
( ), high( ).
Auto
● When selecting heating mode, the air conditioner operates under heat mode.
Heat indicator " " on indoor unit is ON. Press "▲" or " " button to adjust set
temperature. Press "
F
AN" button to adjust fan speed. Press " " button to
adjust fan blowing angle. (Cooling only unit won’t receive heating mode signal. If
setting heat mode with remote controller, press ON/OFF button can’t start up the
unit).
▲
