14
Figure 4
4.2.
HOW TO USE
THE VISIO TOUCH CONTROL UNIT
Adjusting the Day Time:
When the built in oven installed firstly the time of day must be adjusted according to below
instructions.
When oven installed firstly,“0.00” will start to flash on the display. Touch “M“ sensor or “ - “
and “ + “ sensors to adjust the day time mode. “ : ” symbol will start to flash on the display. You
can adjust it with “ - “ and “ + “ sensor.
If Auto cooking mode is off, touch “ - “ and “ + “ sensors at the same time to the day time mode.
You can adjust it with “ - “ and “ + “ sensor.
You have to adjust the day time to use oven function.
ADJUSTING THE COOKER TIME:
Adjusting the Minute Minder:
Touch alarm sensor which shows “ ” symbol. “ ” will be flashing on the display. “0.00” will
appear on the clock digits. Adjust the desired time period for the warning by using Timer Plus
and Minus sensor while the symbol is flashing. Some time after the completion of the
adjustment,
symbol will begin to light continuously. When the symbol begins to light
continuously, the audible warning time adjustment is done. When the set time is up, the timer
gives an audible warning and symbol begins to flash on the screen. Pressing “ - “or “+“ will
stop the audible warning and the symbol disappears on the screen.
M
Mode Key
Oven function
display
Timer display
Temperature display
Alarm Key
Time setting/Temperature
settings for meat probe/
Key lock Key
Time setting Key
