Rasonic RLF-8KIR, Руководство по эксплуатации

Страница: 14 / 22

14
Cleaning and Maintenance
1. Always unplug the unit before cleaning, maintenance or moving. To avoid danger,
unplug the unit and wait until the fan stop running before cleaning.
2. Clean the surface of fan with a soft damp cloth.
3. After cleaning, please dried up the fan before use.
How To Disassemble
1. Remove the screw under the front cover by screwdriver, figure (a).
2. Pull the net buckle, and then remove the front cover, figure (b).
3. Remove the fan blades and back cover as per below figure (c) and figure (d).
Installation
1. Align the holes of the back guard with the column on the motor, then install the back
guard on the motor. (Figure 1)
2. Lock the back guard set nut on the motor. (Figure 2)
3. Align the hole of fan blade with the motor shaft (a), insert the fan blade into motor
shaft. Lock the fan blade over by clockwise (b). (Figure 3)
4. Align the fixed hook of front cover with install position of back guard. (Figure 4)
5. Close the underside net buckle of front cover to fix the cover (b). Use screwdriver to
lock the screw (c). (Figure 5)