– 25 –
輕
便
電
陶
爐
Compact
Ceramic
Cooker
6. Troubleshooting and Treatment
During operations, if any error occurred, please check the following table before calling for service.
Below are common errors and the checks to perform.
Symptoms
Check points
Remedy
After connecting the power and
pressing the [Power] key , the
appliance has no response.
Is the electricity in suspension?
Use after resuming the
electricity.
Is the fuse broken down?
Check the root causes carefully.
If the problem cannot be fixed,
please contact Shun Hing Electric
Service Centre Ltd. for checking
and repairing.
Is the plug connected firmly?
Heating being interrupted in
normal use and a “Beep” will
be heard with power indicator
lighted up.
Is the control panel function
normal?
Contact Shun Hing Electric
Service Centre Ltd. for checking
and repairing.
Is the cookware and ingredients
not being heated?
No heating being in use.
Is the ambient temperature too
high?
Restart the appliance, or contact
Shun Hing Electric Service Centre
Ltd. for checking and repairing
if necessary.
Is the air intake / exhaust
air vent clogged or dirt has
accumulated?
To ensure good ventilation,
remove the dirt clogging the air
intake / exhaust vent.
Is the cooker working over
2 hours without change of
instruction?
This is normal phenomenon.
Reset cooking modes or use
timer function.
Error codes occur.
E0 Ventilation fan short circuit
E1 Ventilation fan open circuit
E2 Internal overheat
E3 Over-voltage
E4 Under-voltage
E5 Top plate sensor open/ short
circuit
E6 Internal sensor open/ short
circuit
E7 Top plate overheat
Contact Shun Hing Electric
Service Centre Ltd. for checking
and repairing.
If the above remedies/solutions cannot fix the problem, unplug the appliance immediately, note
the error code and report it to Shun Hing Electric Service Centre Ltd. (Tel: 2406 5666) for checking
and repairing. To avoid any danger and damage to the appliance,
DO NOT
disassemble or repair
it by yourself.
Shun Hing 72616(M).indb 25
11/11/2020 12:43:21
