10
To meet different requirement of different type of air
conditioner, there are three kinds of methods for your
choice to treat the condensed water.
See the following procedures to perform back drainage:
1. Fit the seal onto the drain joint (which provided with
your air conditioner accessory).
SEAL
DRAIN
JOINT
RUBBER
PLUG
RUBBER
PLUG
SCREW
DRAIN PAN
DRAIN
OUTLET
2. Remove the rubber plug from the back of the unit
(If applicable),and insert the rubber plug (which provided
with your air conditioner accessory) into the bottom drain hole of the unit.
3. Attach the drain joint to the back of the cabinet where you remove the plug and rotate 90
to securely assemble them.
4. Connect the drain joint with a extension drain hose .(Please buy yourself)
O
1. Remove the rubber plug from the bottom of the cabinet and
attach to the back drain hole. For the units without the
bottom rubber plug, just install the drain tray.
2. Take out the drain tray and screws (which provided with
your air conditioner accessory).
3. Install the drain tray at the bottom of the unit and secure with
screws provided.
4. Connect the drain hose to the outlet located at one side of the
drain tray. You can purchase the drain hose or tubing locally to
satisfy your particular needs .
Suggestion: To ensure the condensed water drain off
smoothly, always keep the drain oulet of the the drain tray
downward when install the drain tray.
See the following procedures to perform bottom drainage:
If you choose non-drainage,both the bottom and the back drain hole of the unit should be
inserted with the rubber plug.
Note:
To adjust vertical air flow direction of the up or low horizontal
louvers, adjust any one of the up or low horizontal louver blades.
Vertical air flow adjustment (manually)
Up horizontal louver
Low horizontal louver
