9
PLACEMENT OF REMOTE RECEIVER
Volcanic Ash
used for floor
dressing
Embers spread
over Volcanic Ash
in burner pan
FIGURE 10
RF-LD 60/72-VEI-
Propane
Model below prior to log placement
Natural Gas
Model shown below and How to position Battery Pack outside the fireplace.
RH2
Remote
house
C) Volcanic
Ash used as
Floor dressing.
Volcanic Ash
used to help conceal
Flex connector
and wiring
BATTERY PACK PLACEMENT
NOTE: Any beeping or unexpected shutdown may be the over-temperature safety feature in the receiver. If this
happens, move the receiver into a cooler area, and/or use the RH2/RH3 remote house.
Battery Pack
WARNING
Battery pack needs to be installed outside the
firebox and as far away as possible to assist
in battery life and prevent overheating.
Failure to follow these instructions can void
warranty.
CAUTION:
DO NOT BLOCK AIR VENTS
DOING SO WILL OVERHEAT CONTROLS AND
VOID WARRANTY
(Remove this paper before operating burner)
RH3
Remote
house
RH2
Remote
Volcanic Ash
used to help
conceal Flex
connector
FIGURE 11
WARNING
When using a Remote Control, Battery pack
needs to be installed outside the firebox and
as far away as possible to assist in battery life
and prevent overheating. Failure to follow
these instructions can void warranty.
CAUTION:
DO NOT BLOCK AIR VENTS
DOING SO WILL OVERHEAT CONTROLS AND
VOID WARRANTY
(Remove this paper before operating burner)
Optional
Optional