12
Log locator pins for;
H14 S25 D7
FIGURE 17
STEP FOUR: HF18 TOP LOG AND RECEIVER PLACEMENT
6. TOP LOGS
Using the log locator holes and pins, Place the
Large Center Log
(S25)
onto the
Center Pin
on the
Rear Log (Figures 16 and 17)
.
Place the
Small Center Log (H13)
onto the pin on the Large
Center Log
(Figures 16 and 18)
. Place the
Left Top Log (H14)
over the
Left Pin
and the
Right Top Log (D7)
over the
Right Pin
on the
Rear Log
. (Figures 16 and 17)
S25
H13
Log Locator
Hole
Log Locator
Pin
FIGURE 18
REMOTE RECEIVER PLACEMENT
A) Remote Receiver
for “RE” and “SE”
Models
Black Volcanic
Ash used to help
conceal flex
connector
and wiring
The Remote Receiver (-RE and -SE models) can be adversely affected by heat and must be placed as
far forward and
to the side of your CHILLBUSTER™ as possible
(Figure 19A). When connecting receiver to Motordrive (“-RE” mod-
els) or Solenoid (“SE models) be sure to match red and black connectors, red to red and black to black). Our optional
Ceramic Log House
accessory (Figure 19B), offers heat protection for the Remote Receiver while being pleasing to the
eye. Also sold separately, is our “Stand Alone Crackler” which mimics the sound of a crackling fire adding a cozy feel to
your log set.
Black Volcanic
Ash used as
Floor dressing.
H14
H13
D7
S25
FIGURE 16
FIGURE 19
WARNING:
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically
approved with this heater may result in property damage or personal injury.
C)
B)
