Rasilient AS316, Руководство пользователя

Страница: 11 / 37

AS316 / AS316S User Guide
 Grasp cards and boards by the edges. Hold drives by the frame.
Avoid touching the solder joints or pins.
 If you need to lay the device down while it is out of the antistatic
bag, lay it on the antistatic bag. Before picking it up again, touch
the antistatic bag and the metal frame of the system unit at the
same time.
Rack Warnings
 If you plan to rack mount this product, please follow the rack
manufacturer’s safety instructions.
 Install the enclosure only in a rack that has been properly secured
in an area with suitable environmental conditions.
 Have someone assist you during physical installation.
 To properly ventilate the system, you must provide at least 7.6 cm
of clearance at the front and back of the system.
 To reduce the risk of personal injury or damage to equipment,
always ensure that the rack is adequately stabilized prior to
extending a component outside the rack. A rack may become
unstable if more than one component is extended. Extend only
one at a time.
 Do not stand or step on any components in the rack.
 If installed in a closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment may be greater
than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the
maximum ambient temperature (Tma) specified by the
manufacturer.
 Do no overload the AC power supply branch circuit that provides
power to the rack. Observe extension cable and power strip
ratings. Ensure that the total ampere rating of all equipment
plugged into the extension cable or power strip does not exceed
80 percent of the ampere ratings limit for the extension cable or
power strip.
10