WARNING!
Never look directly into the lamps if lit or stand directly in line with the
luminaire if close by.
Installation, removal or replacement of the unit must be performed with
power o
ff
to prevent any risk of glare and eye injury.
WARNING!
The
fi
xture quickly becomes very hot during operation.
To avoid risk of burn, never handle or adjust the luminaire while it is
energized and after it has been lit for more than 10 consecutive minutes.
Some parts of the luminaire can reach a high temperature, particularly the
body/radiator. Turn o
ff
the luminaire and wait for it to cool before handling.
CONDITIONS OF USE
Photon
fi
xture is a moving-head luminaire equipped with LED
light
source
intended for professional use (e.g., architectural, stage, television, theater, or museum
lighting).
Photon
hybrid
fi
xture has an IP20 protection rating. It is intended strictly for
indoor use. It must never be partially or fully submerged, even temporarily.
Condensation may
form on your 460W LED
fi
xture in the following cases:
• Immediately after turning on the heating
• In places with fog or a high level of humidity
• When the luminaire is suddenly moved from a cold to a warm environment, or vice versa.
In such cases, you must wait until the luminaire readjusts to the ambient
temperature of the room where it will be installed for operation.
Do not shake the 460W LED
fi
xture while installing or handling.
Do not pull the 460W LED
fi
xture by one of its cables to move it. Lift the luminaire by its handles.
Choosing the appropriate place to install the 460 LED hybrid
fi
xture is essential. The
following points should be observed:
• Do not expose it to a heat source.
• Do not install it near
fl
ammable materials.
• Be sure that dust or miscellaneous debris cannot clump around the
body of the luminaire as this may interfere with its optimal cooling and
proper operation.
• The 460W LED
fi
xture must be installed out of reach of the public and all persons
not authorized to operate the luminaire.
We recommend a minimum distance of 5 m between the outside surface
of the light and the illuminated object.
Due to the nature of its cooling principle, you should never prevent air
from circulating around the body of the luminaire. You must provide a
minimum clearance around your 460W LED
fi
xture to allow for cooling.
The 460W LED
fi
xture can be installed in a ground pit or any other con
fi
ned enclosure
only under certain conditions. With this kind of installation, a system
of forced ventilation should be used up to allow air to circulate freely
around the luminaire(s). The air must be constantly renewed because the
luminaire cannot be operated in closed system. Failure to comply with
these requirements may destroy or prematurely wear the 460W LED
fi
xture , and
our company cannot be held responsible.
No load should be placed on the 460W LED
fi
xture. The
fi
xture must not be installed
in such a way as to allow a person, vehicle or any object to run over or park on it.
Never lay or drop any hard, heavy, or blunt, objects on the 460W LED
fi
xture . This
includes items made of glass or porcelain (e.g., bottles, dishware, or glass
beads). The luminaire is made of materials such as plastic and extruded
aluminum, making it resistant but not unbreakable. Objects made of hard
materials such as steel or glass that fall on the unit may cause breakage
of the plastic parts or the body. Our company cannot be held responsible for
the luminaire’s broken plastic parts or body, which are not covered under warranty.
The temperature of the room where the 460W LED
fi
xture is installed must never
exceed 45°C (Ta = 45°C).
The 460W LED luminaire requires a 110-240 VAC supply voltage. Check that
your luminaires have been installed for an application that is compatible with this information.
Check that the brackets on which you hang or attach your 460W LED
fi
xture can
sustain the weight of the luminaire (28kg), taking into consideration all necessary safety factors.
USER MANUAL _ 4
