RASHA PROFESSIONAL Chaos, Быстрое руководство пользователя

Страница: 12 / 20

12
Address This programming level sets the DMX starting address.
•
Starting from the Main Level screen, select Address, press <ENTER>
•
Change the starting address (001–512), press <ENTER>.
Channel Mode
•
Starting from the Main Level screen, select Channel Mode, press <ENTER>
•
Choose the channel mode 13 or 44 Press<ENTER>
Show Mode
•
Starting from the Main Level screen, select Show Mode, press <ENTER>
•
Choose Auto Run for the Auto Run mode press <ENTER>
•
Choose Sound for the Sound active mode press <ENTER>
Mode
•
Highlight Mode, press <ENTER>
•
Choose Master for run the light at Master, press <ENTER>
•
Choose Slave for run the light as Slave or DMX mode, press <ENTER>
Black out
•
Highlight Blackout, press <ENTER>
•
Choose Yes or No to Black out fixture
Sound State
•
Highlight Sound State press <ENTER>
•
Choose On or Off to activate or deactivate sound mode , Press<ENTER>
Sound Sense
•
Highlight Sound Sense, press <ENTER>
•
Set value from 0-100 to set the sound sensor value, Press <ENTER>
Pan Inverse Inverse/Reverse the operation of the pan attribute.
•
Highlight Pan Inverse, press <ENTER>
•
Select the Yes/No, Press<ENTER>
Tilt Inverse Inverse/Reverse the operation of the Tilt attribute.
•
Highlight Tilt Inverse, press <ENTER>
•
Select the Yes/No, Press<ENTER>
Tilt 1 Inverse Inverse/Reverse the operation of the Tilt 1 attribute.
•
Highlight Tilt 1 Inverse, press <ENTER>
•
Select the Yes/No, Press<ENTER>
Tilt 2 Inverse Inverse/Reverse the operation of the Tilt 2 attribute.
•
Highlight Tilt 1 Inverse, press <ENTER>
•
Select the Yes/No, Press<ENTER>
Tilt 3 Inverse Inverse/Reverse the operation of the Tilt 3 attribute.
•
Highlight Tilt 1 Inverse, press <ENTER>
•
Select the Yes/No, Press<ENTER>
Back Light Determines whether or not the backlight of the display will stay on after last
command button pressed.
•
Highlight Display , press <ENTER> .
•
Select OFF or ON , press <ENTER> .
Test This option runs every attribute individually through 1 cycle.
• Highlight Test , press <ENTER> .
Fixture Time The product’s total running time in hour.
• Highlight Fixture Time , press <ENTER> .
Firmware Version The current software version is displayed on the screen
• Highlight Firmware Version , press <ENTER> .
Default Preprogrammed effect with sound active mode
•
Highlight Defaults, press <ENTER>
•
Select the Yes/No, Press<ENTER>
Reset This reverts the product back to its original factory settings
Starting from the Menu screen level, select Reset, press <ENTER> .