Rasha Professional
1800 Rustin Ave Rive
rside CA, 92507
|
951-654-3585
rashaprofessional .com
|
13
1. Intro
Operating through an DMX controller gives the user the freedom to create their own
programs tailored to their own individual needs. Follow the directions below to set your
DMX Mode and address.
1. Before connecting to DMX controller turn on your DMX Wirelss Signal (1), your fixture
has different DMX channel modes; please select your desired DMX Channel mode by
pressing the MENU button button, then using the “Up” or “Down” buttons to scroll to SET.
Press ENTER to access seconday menu. Select option 1 “DMX Channel” and press
ENTER to select desired Channel..
2. After you have selected your mode, set the wireless DMX wireless reciever. The built-
in reciever must be addressed to the same frequency as your transmitter. Press the
ID code Selector Button (2) until the Wireless Signal LED color (3) matches both the
transmitter and your fixture.
Note: If the transmission is successful the light and dmx controller (wireless transmitter)
the Green Led bulb in rear side of the light it will start to blip(means the successful in
transmission).
WIRELESS DMX
If working in 6 Channel mode make sure that the DMX fader 6 is at full 255
and 2-6 are your colors.
138 x 144 x 188
1
2
3
