Rascal R600 Scooter Owner’s Manual
EMC Part: 19271200 • Rev. 03 • 06/01/2003
9
Hazard Switch
The Rascal includes Hazard Indicators to alert others that
you’ve stopped or require assistance. Pressing the
Hazard Switch flashes front and rear amber lamps.
Pressing again turns lamps off.
Note:
This feature is not included on tiller-equipped 600C
models.
Seat Lift Switch
You can use this switch to raise and lower the seat
automatically. Operating this switch and using the right
side Engager Lever raises the seat. Using the left side
Engager lever lowers the seat.
The keyswitch on the dash must be in the “On” position
for the Seat Lift to operate.
If the scooter does not include the Seat Lift, this switch
will not function.
Always check switch position before using the scooter
(driving or raising/lowering the seat).
Note: For your safety the scooter will not operate if it
is in seat lift mode. Please ensure that seat lift switch
is in the “down” position before attempting to drive,
even if the scooter does not have a seat lift installed.
Turn Signals
As an added safety precaution, your scooter is equipped
with turn signals. You can activate the right turn signal by
pressing down on the right side of the toggle switch. To
activate the left turn signal, press down on the left side of
