Rascal R600 Scooter Owner’s Manual
EMC Part: 19271200 • Rev. 03 • 06/01/2003
8
Fuel Gauge
Indicates the charge level of your batteries. If the needle
goes into the red area, the batteries need to be charged
as soon as possible. If the needle is all the way to the
right side of the green area, the batteries are fully
charged. As the needle moves to the red area it indicates
the level of charge remaining in the batteries.
Status Lamp
A green LED lamp indicates that power is available and
serves as a troubleshooting indicator when faults or
errors are detected (see “
Controller Troubleshooting
” on
page 31).
Clock
For convenience, the dash includes an analog clock
displaying the current time of day. The clock may be set
or adjusted by removing the casing from the dash and
using the stem to change time settings. The clock is
powered by a separate battery and does not require the
vehicle to be turned on to operate.
Speed Control
The Dial-A-Speed knob regulates the maximum speed of
the scooter. Start at the slowest speed (settings: 0, 1)
until you feel confident with controlling your scooter.
Turning the speed dial counter-clockwise (towards “1”)
decreases speed. Turning it clockwise (towards “10”)
increases speed. Use slower speeds when first driving
your scooter to avoid accidents.
Engager Lever
The operating speed of your vehicle is proportional to the
amount you squeeze the engager lever. Smooth starts
and stops can be accomplished by gradually moving the
engager lever (similar to a gas pedal in an automobile).
Squeeze the engager lever on the right side to move
forward. Or squeeze the engager lever on the left side to
move in reverse.
FUEL GAUGE
18
26
20 22 24
+
-
STATUS LAMP
12
3
9
6
1
2
3
4
5
6
7
8
9
1
0
FORWARD
REVERSE
