Raritan SX32 Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 178

Raritan SX32 Скачать руководство пользователя страница 80

70 D

OMINION

SX

I

NSTALLATION AND

O

PERATIONS

M

ANUAL

Administrators have access to the following commands currently supported with SSH. Please note that the
commands ARE case sensitive:

1.

console_cmd

: Connect to a serial console target. This command accepts a port number to which the

user wants to connect. The serial target is connected at the given port number of Dominion SX unit. It
is necessary to enter only the port number. The short form of the command is

lp

. Once the console

command has been issued there are additional commands as follows:

•

When a user presses the Escape sequence keys, the control goes to a menu for the console session. The
user is presented with a prompt for the console menu (Admin:Port0:Command>). The following
commands can be executed from this menu:

−

send_break - intended to be used for SUN targets. It sends “break” command to the serial target
(SUN workstation or server).

−

get_history - used to get the history for the console session – from the port buffer, which is
accumulating console output even when there is no connected user on that port. Each Dominion
SX port has an independent port buffer. The history can be copied and pasted into another
program for off-line analysis.

−

get_write – allows users to request write access to the port when in a port-sharing session; shortcut
is

gw

.

−

Help - displays help for console menu.

−

Quit - quits console session and returns to the main menu.

Note: Pressing the <Enter> (Carriage Return) key shall return control back to console session from the
console menu.

2.

list_ports

: displays the list of available ports. Only ports that the user is authorized to see are on the

displayed list. The displayed list contains the port name (as assigned by the user to the port) and the
application associated with it.

3.

change_escape

: used to change the escape character used to exit from the serial target session. For

example if the user has connected to a serial target at port 2 using “console_cmd 2”, then the escape
character can be used to come back to menu prompt “RaritanCommand>”

Default Escape Character is

CTRL

[i.e., Press CTRL key ]. The escape character can be a single key

or a combination of “Ctrl” key and another key from the following set [‘@’, ‘a – z’, ‘A – Z’, ‘[‘, ‘]’, ‘\’,
‘^’, ‘_’]. Using a single-key for the escape sequence is strongly discouraged.

4.

help

or

h

or

?

: displays the list of supported commands.

5.

user_list

- displays list of all users who are logged in, their source IP Addresses and any ports they are

connected to ; shortcut is

ul

6.

log

<start|stop|clear|status> - used to start/stop/clear or get status of syslog (use cfglog command to

configure syslog)

7.

cfglog

<[local <wrap|flat> [FILE SIZE]] | [remote [SERV1] [SERV2]]> - used to configure location

and size of syslog (use

log

command to start/stop/clear or get status of syslog); currently, local logging

should not be used.

8.

tacacs_cfg

<enable|disable|status> [<SERVIP> <ServerPort> <keyString>] - used to configure

remote authentication and authorization, or to get status.

9.

nfsportlog

<enable|disable|status> [<PREFIX> <SIZE> <SERV1> <SERVDIR> [<SERV2>

<SERVDIR2>] - used to configure NFS session/port logging.

10.

snmp

[<<enable|disable> [COMM_NAME]|<add|del> RECIPIENT>] - configuration of SNMP traps.

r

11.

reset

12.

service

[<telnet|ssh><enable|disable>].

13.

lpa

[<enable|disable|status> [BPS]] – Enable/Disable/Set speed in bits per second (BPS) and show

status of local port access (connection of VT100 terminal/PC/workstation with communications
software to serial port on SX unit).

14.

diagnostics commands

15.

modem commands port commands

16.

network commands

17.

user config commands

18.

ipacl

<enable|disable|status>

19.

aclcfg

<[list] | [clear] | [move <pos1> <pos2>] |

«
...
78
79
80
81
82
...
»

Содержание SX32



















































































































































































Отзывы:

Нет отзывов