Raritan SX32 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 178

Raritan SX32 Скачать руководство пользователя страница 47

C

HAPTER

4:

C

ONSOLE

F

EATURES

37

TCP/IP network may be set to listen to broadcasts on this address; if this is the case, it can be
configured to use another port address. However, this port address MUST match the port address
specified by the CC administrator; otherwise the Dominion SX unit will not be discovered by CC. This
port address is relevant only for CC releases 2.3 or higher.

Click on the [

Update

] button to load all the changes.

Click on the [

Save

] button to make the changes permanent.

Important! Remember that saving changes to Network Configuration settings will cause the unit
to reboot.

The parameters for configuring modem access include:

PARAMETER

DESCRIPTION

Enable Modem

Configures the modem to answer calls

PPP Server IP

IP address of the PPP server (Dominion SX unit)

PPP Client IP

IP address of the PPP client (remote computer)

Enable modem Dial Back

Enables Modem dial back (phone number for
modem dial back is specified in the CLI using
SSH [or telnet, if enabled]).

Configure Modem Parameters

1.

Check the Enable Modem box.

Note: Click on the checkbox before Enable Modem Dial Back and type the phone number for dial back
using the command line interface (SSH/telnet). Enabling Modem Dial Back potentially enhances security,
and is recommended for most applications.

2.

Type the

PPP Server IP

address used by the client to access Dominion SX once the modem

connection is established.

3.

Type the

PPP Client IP

address assigned by Dominion SX to the client in order for the connection to

be established.

4.

Click

Update

.

5.

Click

Save

.

6.

Optionally, enable modem dial back and type the phone number for dial back using the CLI
(SSH/telnet). Using modem dial back can potentially enhance security, and is recommended for most
applications.

The Modem Status field indicates one of two states:

•

Running

: The modem is configured and is operational.

•

Stopped

: The modem is not operational.

The [

Initialize Modem

] button can be used to reset the modem if it is running but not operating properly.

Note: Be sure to verify the above information with your Network Administrator prior to configuring the
unit.

When using Microsoft Windows, once Microsoft dial-up networking has established a connection, a
network is constructed with the parameters specified in the Modem Settings area of the Network
configuration window. The client computer now can be connected to two separate networks. These
networks must have distinct IP addresses if modem access is to function properly. The second network
established by the PPP connection has only two devices, the Dominion SX unit with IP address PPP Server
IP and the client computer with IP address PPP Client IP.

Please see

Appendix G: Modem Configuration

for additional information on configuring Microsoft dial-

up networking on Windows 2000, Windows 98, and Windows NT.

«
...
45
46
47
48
49
...
»

Содержание SX32



















































































































































































Отзывы:

Нет отзывов