Raritan MCCAT18, Руководство пользователя

Страница: 39 / 61

Chapter 5: Two-Tier System
33
q
First ‐ tier MCCAT unit
r
Keyboard, mouse and monitor (attached to the
first ‐ tier unit only)
Setting Up a Two-Tier System
Basically, there are five major steps to set up a two ‐ tier system:
ƒ
STEP 1: Programme an MCCAT unit as a second ‐ tier device
ƒ
STEP 2: Connect the second ‐ tier MCCAT unit to the first ‐ tier
MCCAT unit
ƒ
STEP 3: Connect the keyboard, mouse and monitor to the first ‐ tier
MCCAT unit
ƒ
STEP 4: Specify the type of the second ‐ tier device in the
Configuration Menu
ƒ
STEP 5: Connect computers to any MCCAT unit in the system
STEP 1: Programme an MCCAT Unit as a Second-Tier
Device
Each MCCAT unit is programmed as a first ‐ tier device when shipped out
of the factory. To set up a two ‐ tier MCCAT system, you have to
programme some MCCAT units as the second ‐ tier devices before
proceeding with the hardware installation.
1. Turn OFF the MCCAT unit.
2. Press the channel number 2 button on the front panel, and then
power ON the MCCAT unit.
3. Continue to hold down the channel number 2 button until you hear
the beep sound.
4. The TIER LED (the top ‐ right one) on the front panel is lit
continuously, indicating the device is now programmed as a
second ‐ tier device.
5. Repeat Steps 1 to 4 if more MCCAT units are to be programmed as
second ‐ tier devices.
Note: To programme a second ‐ tier device back as the first ‐ tier device, follow the
same procedure described above, but press the channel number 1 button instead
while the MCCAT unit is being powered ON. The TIER LED turns off,
indicating it is now programmed as a first ‐ tier device.