Raritan EMX2-111, Руководство пользователя

Страница: 198 / 565

Chapter 6: Using the Web Interface
186
Field Do this
Challenge,
Confirm Challenge
Type a password. The password is used to protect the certificate or
CSR. This information is optional.
The value should be 4 to 64 characters long. Case sensitive.
3. Click Create New SSL Key to create both the CSR and private key.
This may take several minutes to complete.
4. Click Download Certificate Signing Request to download the CSR to
your computer.
a. You are prompted to open or save the file. Click Save to save it
onto your computer.
b. Submit it to a CA to obtain the digital certificate.
c. If the CSR contains incorrect data, click Delete Certificate
Signing Request to remove it, and then repeat the above steps to
re-create it.
5. To store the newly-created private key on your computer, click
Download Key in the New SSL Certificate section.
Note: The Download Key button in the Active SSL Certificate section
is for downloading the private key of the currently-installed
certificate rather than the newly-created one.

You are prompted to open or save the file. Click Save to save it
onto your computer.
6. After getting the CA-signed certificate, install it. See Installing a
CA-Signed Certificate
(on page 186).
Installing a CA-Signed Certificate
To get a certificate from a certificate authority (CA), first create a CSR
and send it to the CA. See
Creating a CSR (on page 185).
After receiving the CA-signed certificate, install it onto the EMX.
To install the CA-signed certificate:
1. Choose Device Settings > Security > SSL Certificate.
2. Click to navigate to the CA-signed certificate file.
3. Click Upload to install it.
4. To verify whether the certificate has been installed successfully,
check the data shown in the Active SSL Certificate section.