Raritan Dominion Px, Руководство пользователя, Страница: 186 / 281

Chapter 6: Using SNMP
171
Changing ID Numbers of Environmental Sensors
All ID numbers of existing environmental sensors can be rearranged at a
time by using the SNMP MIB variable
"reorderexternalSensorsTableEntries" and a comma-separated list.
Below are the guidelines of using this variable:

ID numbers of all managed sensors must be present in the list no
matter their ID numbers will be changed or retained.

The list cannot contain more than 16 ID numbers, or it is discarded.

A valid ID number ranges between 1 to 16.

Each ID number must appear only once in the list.

If there are missing numbers in the original ID numbers, mark each
missing number with a comma when changing ID numbers.
Example without Missing Numbers
If you have five environmental sensors with the ID numbers 1, 2, 3, 4, and
5, and want to change the ID numbers as shown below:

1 to 13

2 to 8

3 to 9

4 remains unchanged

5 to 2
The original ID numbers are consecutive without any missing numbers so
no additional commas should be added.
Position 1 2 3 4 5
Original ID
numbers
1, 2, 3, 4, 5
New ID
numbers
13, 8, 9, 4, 2
Therefore, your comma-separated list looks like the following:
13,8,9,4,2
Example with Missing Numbers
If you have five environmental sensors with the ID numbers 2, 5, 6, 7, 11,
and want to change the ID numbers as shown below:

2 to 13

5 to 8